pow er 1 form a high capacity (aqz26 ? ) types * indicate the peak ac and dc values. rating 1. absolute maximum ratings (ambient temperature: 25 c 77 f ) high capacity up to 6a in a slim sil package pow er 1 form a high capacity (aqz26 ? ) output rating* pac kage part no. pac king quantity load voltage load current inner carton outer carton ac/dc dual use 60 v 6.0 a sil4-pin aqz262 20 pcs 200 pcs 400 v 1.0 a AQZ264 item symbol aqz262 AQZ264 remarks input led forward current i f 50 ma led reverse voltage v r 5 v peak forward current i fp 1 a f = 100hz, duty factor = 0.1% pow er dissipation p in 75 ma output load voltage (peak ac) v l 60 v 400 v continuous load current i l 6.0 a 1.0 a peak ac, dc peak load current i peak 10.0 a 3.0 a 100 ms (1shot), v l = dc pow er dissipation p out 3.0 w total power dissipation p t 3.0 w i/o isolation voltage viso 1,500 v ac temperature limits operating t opr ?0 c to +85 c ?0 f to 185 f non-condensing at low temperatures storage tstg ?0 c to +100 c ?0 f to 212 f mm inch features 1. high capacity type power photomos relay. can switch a wide range of currents and voltages. can control various types of loads, from very small loads to a max. 6a ac/dc current for sequencers, motors, and lamps. 2. low on-resistance and high sensitivity. low on-resistance of less than typ. 0.036 ? (aqz262). high sensitivity led operate current of typ. 1 ma. 3. ac/dc dual use bi-directional control is possible. there is no need to differentiate depending on the load as was necessary with the conventional ssr. 4. 4-pin sil type (l) 43.0 mm (w) 9.0 mm (h) 32.0 mm (l) 1.693 inch (w) .354 inch (h) 1.260 inch. 5. low-level off state leakage current of max. 10 a 6. controls low-level analog signals the triac, photocoupler, or ssr cannot be used to control signals of less than several hundred mv. the high capacity type power photomos relay feature e xtremely low closed-circuit offset voltage to enable control of low-level analog signals without distortion. typical applications ?mercury relay replacement ?compact motors, lamps, heaters ?oa equipment max. 32.0 max. 43.0 max. 9.0 1.260 1.693 .354 ? 12 3 4 compliance with rohs directive height includes standoff all rights rese r v ed ? c opyright panasonic elect r ic w o r k s co., ltd.
pow er 1 form a high capacity (aqz26 ? ) 2. electrical characteristics (ambient temperature: 25 c 77 f ) *turn on/off time recommended operating conditions please obey the following conditions to ensure proper relay operation and resetting. for dimensions. for s c hematic and wiring di a grams. for cautions f or us e . these products are not designed for automotive use. if you are considering to use these products for automotive applications, please contact your local panasonic electric works technical representative. for more information. reference data item symbol aqz262 AQZ264 remarks input led operate current typical i fon 1.0 ma i l = 100 ma v l = 10 v maximum 3.0 ma led turn off current minimum i foff 0.4 ma i l = 100 ma v l = 10 v typical 0.9 ma led dropout voltage typical v f 1.25 v (1.16 v at i f = 10 ma) i f = 50 ma maximum 1.5 v output on resistance typical r on 0.036 ? 1.0 ? i f = 10 ma i l = max. within 1 s on time maximum 0.05 ? 1.4 ? off state leakage current maximum i leak 10 a i f = 0 ma v l = max. tr ansfer characteristics tu rn on time* typical t on 5 ms 4 ms i f = 10 ma i l = 100 ma v l = 10 v maximum 10 ms tu rn off time* typical t off 0.32 ms 0.14 ms i f = 10 ma i l = 100 ma v l = 10 v maximum 3.0 ms i/o capacitance typical c iso 2.0 pf f = 1 mhz v b = 0 v maximum 4.0 pf initial i/o isolation resistance minimum r iso 1,000 m ? 500 v dc maximum operating frequency maximum 0.5 cps i f = 10 ma duty factor = 50% i l = max., v l = max. item symbol recommended value unit input led current i f 5 to 10 ma ton input output 10% 90% toff 1. load current vs. ambient temperature characteristics allowable ambient temperature: ?0 c to +85 c ?0 f to +185 f 2. load current vs. ambient temperature characteristics in adjacent mounting i l : load current; i l (max.): maximum continuous load current 3. on resistance vs. ambient temperature characteristics led current: 10 ma; continuous load current: 6a (dc)(aqz262) 1a (dc)(AQZ264) 7 6 5 4 3 2 1 0 0?0 20 40 60 80 85 100 ?0 aqz262 AQZ264 ambient temperature, c load current, a 80 85 120 100 80 60 40 20 0 0?0 20 40 60 100 ?0 ambient temperature, c i l /i l (max.) 100, % =adjacent mounting pitch =10mm =20mm .394 inch .787 inch 2 1.5 1 0.5 0 0?0 20 40 60 80 85 ?0 aqz262 AQZ264 ambient temperature, c on resistance, ? all rights rese r v ed ? c opyright panasonic elect r ic w o r k s co., ltd.
pow er 1 form a high capacity (aqz26 ? ) 4. turn on time vs. ambient temperature characteristics led current: 10 ma; load voltage: 10 v (dc); continuous load current: 100 ma (dc) 5. turn off time vs. ambient temperature characteristics led current: 10 ma; load voltage: 10 v (dc); continuous load current: 100 ma (dc) 6. led operate vs. ambient temperature characteristics load voltage: 10 v (dc); continuous load current: 100 ma (dc) 10 8 6 4 2 0 0?0 20 40 60 80 85 ?0 aqz262 AQZ264 ambient temperature, c turn on time, ms 1 0.8 0.6 0.4 0.2 0 0?0 20 40 60 80 85 ?0 aqz262 AQZ264 ambient temperature, c turn off time, ms 5 4 3 2 1 0 0?0 20 40 60 80 85 ?0 aqz262 AQZ264 ambient temperature, c led operate current, ma 7. led turn off current vs. ambient temperature characteristics load voltage: 10 v (dc); continuous load current: 100 ma (dc) 8. led dropout voltage vs. ambient temperature characteristics sample: all types; led current: 5 to 50 ma 9. current vs. voltage characteristics of output at mos portion ambient temperature: 25 c 77 f 5 4 3 2 1 0 0?0 20 40 60 8085 ?0 AQZ264 aqz262 ambient temperature, c led turn off current, ma 1.5 1.4 1.3 1.2 1.1 1.0 0 0?0 20 40 60 100 80 85 ?0 50ma 30ma 20ma 10ma 5ma led dropout voltage, v ambient temperature, c ?.0 ?.5 ?.0 ?.5 ?.0 ?.0 ?.0 ?.0 0.5 2.0 1.0 2.01.5 aqz262 AQZ264 8.0 6.0 4.0 voltage, v current, a 10. off state leakage current vs. load voltage characteristics ambient temperature: 25 c 77 f 11. turn on time vs. led forward current characteristics load voltage: 10 v (dc); continuous load current: 100 ma (dc); ambient temperature: 25 c 77 f 12. turn off time vs. led forward current characteristics load voltage: 10 v (dc); continuous load current: 100 ma (dc); ambient temperature: 25 c 77 f 0 50 100 10 ? 10 ? 10 ? 10 ?2 AQZ264 aqz262 load voltage, v off state leakage current, a 50 40 30 20 10 0 10 20 30 40 500 AQZ264 aqz262 led forward current, ma turn on time, ms 0.5 0.6 0.4 0.3 0.2 0.1 0 10 20 30 40 500 aqz262 AQZ264 led forward current, ma turn off time, ms 13. maximum operating frequency vs. load voltage/current characteristics led current: 10 ma; ambient temperature: 25 c 77 f 14. output capacitance vs. applied voltage characteristics frequency: 10 khz; ambient temperature: 25 c 77 f 15.-(1) on resistance distribution sample: aqz262 led current: 10 ma; continuous load current: 6 a (dc): quantity. n=100; ambient temperature: 25 c 77 f 10 9 8 7 6 5 4 3 2 1 0 050 100 150 200 250 300 350 400 450 load voltage, v load current, a maximum operating frequency, time/s duty = 50% 5000 4000 3000 2000 1000 0 020406 080 100 aqz262 AQZ264 applied voltage, v output capacitance, pf 80 70 60 40 20 10 50 30 0 0 26.5 27.5 28.5 30.529.5 on resistance, m ? quantity all rights rese r v ed ? c opyright panasonic elect r ic w o r k s co., ltd.
pow er 1 form a high capacity (aqz26 ? ) 15.-(2) on resistance distribution sample: AQZ264 led current: 10 ma; continuous load current: 1 a (dc); quantity, n=100; ambient temperature: 25 c 77 f 16.-(1) turn on time distribution sample: aqz262 load voltage: 10 v (dc); continuous load current: 100 ma (dc); quantity, n=100; ambient temperature: 25 c 77 f 16.-(2) turn on time distribution sample: AQZ264 load voltage: 10 v (dc); continuous load current: 100 ma (dc); quantity, n=100; ambient temperature: 25 c 77 f 80 70 60 40 20 10 50 30 0 0 0.9 1 1.1 1.31.2 on resistance, ? quantity 80 70 60 40 20 10 50 30 0 056 4 37 turn on time, ms quantity 80 70 60 40 20 10 50 30 0 02 3 4 65 quantity turn on time, ms 17.-(1) turn off time distribution sample: aqz262 load voltage: 10 v (dc); continuous load current: 100 ma (dc); quantity, n=100; ambient temperature: 25 c 77 f 17.-(2) turn off time distribution sample: AQZ264 load voltage: 10 v (dc); continuous load current: 100 ma (dc); quantity, n=100; ambient temperature: 25 c 77 f 18.-(1) led operate current distribution sample: aqz262 load voltage: 10 v (dc); continuous load current: 100 ma (dc); quantity, n=100; ambient temperature: 25 c 77 f 80 70 60 40 20 10 50 30 0 0 0.32 0.36 0.4 0.480.44 turn off time, ms quantity 80 70 60 40 20 10 50 30 0 0 0.1 0.14 0.18 0.260.22 turn off time, ms quantity 80 70 60 40 20 10 50 30 0 0 1.1 1.30.90.7 1.5 quantity led operate current, ma 18.-(2) led operate current distribution sample: AQZ264 load voltage: 10 v (dc); continuous load current: 100 ma (dc); quantity, n=100; ambient temperature: 25 c 77 f 19.-(1) led turn off current distribution sample: aqz262 load voltage: 10 v (dc); continuous load current: 100 ma (dc); quantity, n=100; ambient temperature: 25 c 77 f 19.-(2) led turn off current distribution sample: AQZ264 load voltage: 10 v (dc); continuous load current: 100 ma (dc); quantity, n=100; ambient temperature: 25 c 77 f 80 70 60 40 20 10 50 30 0 0 0.7 0.9 1.1 1.51.3 quantity led operate current, ma 80 70 60 40 20 80 50 30 0 0 1.1 1.30.90.7 1.5 quantity led turn off current, ma 80 70 60 40 20 10 50 30 0 0 0.7 0.9 1.1 1.51.3 quantity led turn off current, ma 20.-(1) led dropout voltage distribution sample: aqz262 led current: 50 ma; quantity, n=100; ambient temperature: 25 c 77 f 20.-(2) led dropout voltage distribution sample: AQZ264 led current: 50 ma; quantity, n=100; ambient temperature: 25 c 77 f 21.-(1) bias test at high temperature and high humidity (change of turn on time) quantity, n=10; ambient temperature: 85 c 185 f humidity: 85%, vl=max. 0.8 100 80 60 40 20 0 0 1.24 1.26 1.28 1.321.3 quantity led dropout voltage, v 100 80 60 40 20 0 0 1.24 1.26 1.28 1.321.3 quantity led dropout voltage, v 10 8 6 4 2 0 110 2 10 3 10 AQZ264 test time, h aqz262 turn on time, ms all rights rese r v ed ? c opyright panasonic elect r ic w o r k s co., ltd.
pow er 1 form a high capacity (aqz26 ? ) 21.-(2) bias test at high temperature and high humidity (change of on resistance) quantity, n=10; ambient temperature: 85 c 185 f humidity: 85%, vl=max. 0.8 22.-(1) low temperature storage test (change of turn on time) quantity, n=10; ambient temperature: ?0 c ?0 f 22.-(2) low temperature storage test (change of on resistance) quantity, n=10; ambient temperature: ?0 c ?0 f 2 1.6 1.2 0.8 0.4 0 1 10 10 2 10 3 test time, h aqz262 AQZ264 on resistance, ? 10 8 6 4 2 0 1 10 10 2 10 3 AQZ264 aqz262 test time, h turn on time, ms 2 1.6 1.2 0.8 0.4 0 1 10 10 2 10 3 test time, h on resistance, ? AQZ264 aqz262 23.-(1) high temperature storage test (change of turn on time) quantity, n=10; ambient temperature: 100 c 212 f 23.-(2) high temperature storage test (change of on resistance) quantity, n=10; ambient temperature: 100 c 212 f 10 8 6 4 2 0 1 10 AQZ264 aqz262 10 2 10 3 test time, h turn on time, ms 2 1.6 1.2 0.8 0.4 0 1 10 AQZ264 aqz262 10 2 10 3 test time, h on resistance, ? all rights rese r v ed ? c opyright panasonic elect r ic w o r k s co., ltd.
|
